3-1
TORX T10 screwdriver with shaftlength 150mm ......................................4822 395 50423
TORX screwdriver set SBC 163 ..............................................................4822 295 50145
Audio signal disc SBC 429......................................................................4822 397 30184
Playability test disc SBC444 ...................................................................4822 397 30245
Test disc 5
(disc without errors) +
Test disc 5A (disc with dropout errors, black spots and fingerprints)
SBC 426/426A ....................................................................4822 397 30096
Burn in test disc (65 min. 1kHz signal at -30dB level without "pause") ...4822 397 30155
Service Tools
Service hints
Handling chip components
The sets are equipped with a special DEALER MODE.
This mode blocks the trays of the CDC - and CDR module to prevent customers from fetching out CDs from exhibition sets.
The dealer mode can be switched on/off as follows:
1) Switch the set with the stanby-button to standby mode
2) Press the [DISPLAY] key for longer than 5s
→
Display shows „ TRAYS LOCKED“ respectively „ UNLOCKED“
Escape from „Dealer Mode“
The demo mode displays various features of the set and will start automatically.
To cancel the demo mode keep „STOP“ button on the set pressed for at least 5 seconds.
The demo mode is cancelled permanently. The set switches to standby.
Escape from „Demo Mode“
