27
English
3140 115 29791
Tape Operation / Recording
Rewinding / Fast forwarding
1
Stop playback, press
à
or
á
.
➜
The tape will stop automatically at the end of
rewinding or fast forwarding.
2
Press
Ç
to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (VCD or
TUNER, for example).
General information on
recording
●
If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
●
For recording, use only tape of IEC type I
(normal tape).
●
The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
●
The tape is secured at both ends with leader
tape. At the beginning and
end of the tape, nothing will
be recorded for six to seven
seconds.
●
To prevent accidental
recording, break out the tab
on the left shoulder of the
tape side you want to protect.
●
If “
CHECK TAPE
” is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.
Preparation for recording
1
Press
TAPE
to select TAPE 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
VCD
– load the disc(s).
TUNER
– tune to the desired radio station.
TAPE
– load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX
– connect external equipment.
When recording is in progress
➜
REC
starts flashing.
●
It is not possible to listen to another source,
except tape dubbing.
●
It is not possible to activate the timer function
during recording or tape dubbing.
One touch recording / Recording
the mixed sound
1
Press
VCD 1/2/3
,
TUNER
or
AUX
to select
the source.
●
You can connect a microphone to record the
mixed sound (refer to “Karaoke - Microphone
Mixing”).
2
Start playback of the selected source.
3
Press
RECORD
to start recording.
To stop recording
●
Press
Ç
on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "
SELECT SOURCE
" will be displayed.
CD Synchronised start recording
1
Press
VCD 1/2/3
to select the disc.
●
Press
í
or
ë
to select the desired track to
start recording.
●
You can programme the tracks in the order you
want them to be recorded (refer to “CD/VCD/
MP3-CD Operations - Programming the disc
tracks”).
2
Press
RECORD
to start recording.
➜
The disc will start playback automatically.