3139 116 19982
16
English
VIDEO CD
Adjusting the TV System
Before viewing the Video CD, ensure that
the set is switched to corresponding PAL or
NTSC system of your TV set
(exception
Multi-system TV).
• Press and hold
PAL/NTSC
for more
than
2 seconds
to switch between PAL
or NTSC TV system.
™
After TV system is selected, the set
will automatically switch to the last
TV system setting everytime the VCD
source is selected.
Note:
– Before adjusting the TV system, make
sure that there is not MP3-CD in disc
tray 1 during power up.
OSD - On Screen Display
If you insert one or more VCDs/CDs, your
TV screen will serve as an additional
display for messages (e.g. PLAY, STOP), and
information stored on the VCD/CD.
• Press
OSD
on the remote control
repeatedly to switch ON or OFF.
When OSD is switched ON; you can see
the following display on the TV screen.
Below is an example of the OSD message.
SINGLE ELAPSED
PLAY
XX/TT
MM:SS
Notes:
– "
XX
" is the current track.
– "
TT
" is the total tracks.
– "
MM
" is in minutes.
– "
SS
" is in seconds.
When OSD is switched off; there is no
information indicated on the TV screen.
Playing a Video CD with PBC
VCDs with PBC (Play Back Control) will be
indicated on the display of the set and on
your TV screen as soon as they are
inserted. PBC is a predefined play
sequence stored on the VCD.
1
Switch on the TV, insert a VCD with PBC
and press
ÉÅ
to start playback.
2
MENU appears on the TV screen.
If a menu consists of a list of titles you can
select a sequence directly.
1
Select your choice with the
digit keys
0 - 9
on the remote control. The VCD
starts playing of the selected sequence
automatically.
2
Press
RETURN (
) to go back to the
previous menu.
Note:
– If a menu consists of more than one
page, it is possible to go through the
pages with PREV./NEXT on the set or
remote control.
Switching off PBC
• It is possible to switch off PBC in STOP
mode by pressing the
PBC
button. Now
this VCD can be treated like a normal
VCD.
™
The TV display will show
< PBC OFF >
.
Notes:
– In PBC mode PROGRAM is not active.
– The MENU structure depends on the
program stored on the VCD. Please refer
to the information supplied with the
disc.
Slow
1
Press
SLOW
on the remote control to
watch a VCD in a slow speed. There are
3 types of slow modes to select.
™
"
SLOW 1
" , "
SLOW 2
" or
"
SLOW 3
" appears on the TV
screen.
2
Press
ÉÅ
again to resume playback at
normal speed.
Note:
– Audio is muted in Slow mode.
Resume
This feature is also applicable to audio CD
(except for MP3-CD).
1
Press
Ç
to stop playback.
2
Press
RESUME
on the remote control
to start playback again from where you
have stopped.
™
"
RESUME
" appears on the display.
Note:
– Resume information is lost if you select
another disc or the set is disconnected
from the mains, the system is switched
to standby mode or when you change
source.
– Resume is not available when PBC
mode is switched on.
Pause
1
Press
ÉÅ
to have a still picture on the
TV screen.
™
"
PAUSE
" appears on the TV screen.
2
Press
ÉÅ
again to continue playback.
Note:
– Audio is muted during Pause.
CD / VCD / MP3-CD
pg 01-28/V39/21-En
6/8/01, 9:01 AM
16
