background image

18

English

3140 115 30491

Select a desired track/passage

To search for a particular passage during
playback

Press 

à

 or 

á

 to select 4 different search

speed.

"

FRX1

"; "

FRX2

"; "

FRX3

" or "

FRX4

" will be

displayed on the TV screen when you select a
fast rewind search.

"

FFX1

"; "

FFX2

"; "

FFX3

" or "

FFX4

" will be

displayed on the TV screen when you select a
fast forward search.

Normal playback will begin at the end of the

fast rewinding or forwarding of the selected
track.

Play returns to normal when 

PLAY

ÉÅ

 is

pressed or when a new track is selected.

To select a desired track

Press 

í

 or 

ë

 repeatedly (or 

Digits 0–9

 on

the remote control) until the desired track
appears on the display.

If playback is stopped, press 

PLAY

ÉÅ

 

 to start

playback.

Note:
– Maximum track selection from digital keys on
the remote control is 199 for MP3-CD and 99 for
VCD/CD.

For MP3-CD only

To select a desired Album

Press 

ALBUM

 

-

-

-

-

-

/

+

+

+

+

+

 (

à

 or 

á

) repeatedly

until the desired Album appears on the display.

ALB

 will start flashing.

AXX T001

” will be displayed after the

album name scrolled through the display briefly.

To select a desired Title

Press 

TITLE

 

-

-

-

-

-

/

+

+

+

+

+

 (

í

 or 

ë

)

 

repeatedly until

the desired Title appears on the display.

Use the digital keys on the remote control to
select the track under current Album directly.

TITLE

 will start flashing.

A01 TXXX

” will be displayed after the title

name scrolled through the display briefly.

Note:
– "

A

" represents ALBUM and "

T

" represents

TRACK, "

XX

" or "

XXX

" is the current selected

Album or Track number.

CD/VCD/MP3-CD Operation

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.

1

Load the desired discs on the disc tray (refer to
“Loading Discs”).

2

Press the 

VCD

 (CD 1•2•3) button to select the

disc tray.

Programming can only be done on the

selected disc.

3

Press 

PROG

 to start programming.

PROG

 will start flashing.

It will cancel any previously programmed

tracks and selected repeat mode.

4

Press 

í

 or 

ë

 repeatedly (or 

Digits 0–9

 on

the remote control) to select the desired track.

For MP3-CD, press 

ALBUM

 

-

-

-

-

-

/

+

+

+

+

+

 and 

TITLE

-

-

-

-

-

/

+

+

+

+

+

 to select the desired Album and Title for

programming.

5

Press 

PROG

 to store the track.

Repeat 

steps 3–5

 to store other tracks.

6

Press 

PLAY

ÉÅ

  to start programme playback.

"

PLAY PROGRAM

" will be displayed.

To end programming without starting playback,
press 

Ç

 

once

 .

The total number of tracks programmed and

the total playing time will appear on the display.

Notes:
– Programme cannot be used for VCDs when PBC
is switched on. Switch off PBC before storing tracks.
– For MP3-CD, total playing time will not be
shown.
– If the total playing time is more than "

99:59

",

then "

--:--

" will appear on the display instead

of the total playing time.
– If you attempt to programme more than 99
tracks, "

PROGRAM FULL

" will be displayed.

– During programming, if no button is pressed
within 20 seconds, the system will exit the
Programme mode automatically.

To review the programme

Stop playback and press 

í

 or 

ë

 repeatedly.

To exit review mode, press 

Ç

.

Summary of Contents for FW-V537

































Reviews: