Philips FW748P, User Manual

18

English

TUNER

Storing Preset Stations

You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.

Automatic programming
1

Press 

TUNER 

(BAND).

2

Press 

PROGRAM

 for more than one

second.

™

The 

PROGRAM

 flag starts flashing and

“

AUTO

” will be displayed.

™

The system will search for every
available station in the FM waveband
first, then search by the MW and LW
wavebands.

™

All available stations will be stored
automatically. The frequency and
preset number will be displayed
briefly.

™

The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.

™

The system will remain tuned to the
last stored preset radio station.

Notes:
– You can cancel the automatic

programming by pressing PROGRAM or
STOP•CLEAR 

Ç

 (on the system only).

– If you want to reserve a section of

preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming; only
the preset numbers 10 to 40 will be
programmed.

Manual programming
1

Press 

TUNER 

(BAND).

2

Press 

TUNER

 (BAND) again to select

the desired waveband : FM, MW or LW.

3

Press 

PROGRAM

 for less than one

second.

™

The 

PROGRAM

 flag starts flashing.

™

The next available preset number will
be displayed for selection.

4

Press 

TUNING

à

 or 

á

 to tune to the

desired frequency.

• If you wish to store the radio station to

another preset number, press 

PRESET

4

 or 

3

 to select the desired preset

number.

5

Press 

PROGRAM

 again.

™

The 

PROGRAM

 flag disappears and the

radio station will be stored.

• Repeat the 

steps 3 – 5

 to store other

preset radio stations.

Notes:
– When 40 radio stations are stored and

you attempt to store another radio
station, the display will show
"

FULL

”. If you want to change an

existing preset number, repeat steps 3 –
5.

– You can cancel manual programming by

pressing  STOP•CLEAR 

Ç

 (on the

system only).

– During programming,  if no button is

pressed within 20 seconds, the system
will exit program mode automatically.

Tuning to Preset Radio
Stations

• Press 

PRESET

4

 or 

3

 to select the

desired preset number.

™

The preset number, radio frequency,
and waveband appear on the display.