21
English
Notes:
– For recording, use only tape of IEC type I
(normal tape).
– The tape is secured at both ends with
leader tape. At the beginning and end of
tape, nothing will be recorded for 6 to 7
seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
One Touch Recording
• For One Touch Recording, as soon as you
press RECORD, the current source (CD,
TUNER or AUX) will be recorded on tape
deck 1.
1
Load a blank tape in tape deck 1.
2
Press
RECORD
on tape deck 1 to start
recording.
™
The
REC
flag starts flashing.
3
Press
PAUSE
to interrupt recording.
4
Press
STOP
•
OPEN
on tape deck 1 to
stop recording.
RECORDING
CD Synchro Start Recording
During CD synchro start recording,
• Do not fast forward/rewind your tape in
tape deck 2.
• Do not listen to another source.
1
Load a blank tape into tape deck 1 and a
disc into the disc tray.
2
Press
CD
.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If you do not, the
tracks are recorded according to the
order on the selected disc.
3
Press
RECORD
on tape deck 1 to start
recording.
4
Press
STOP
•
OPEN
on tape deck 1 to
stop recording and
STOP•CLEAR
Ç
to
stop CD playback.
Dubbing tapes
(from tape deck 2 to
tape deck 1)
1
Load the prerecorded tape into tape
deck 2 and a blank tape into tape deck
1.
™
Make sure both tapes have their full
spool to the left.
2
Press
PAUSE
on tape deck 1.
3
Press
RECORD
on tape deck 1.
4
Press
PLAY
É
on tape deck 2.
™
Recording will start automatically.
™
The
REC
flag starts flashing.
5
Press
STOP
•
OPEN
on tape deck 1 and
tape deck 2 to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of
the same length.
Recording from other sources
(only on tape deck 1)
1
Load a blank tape into tape deck 1.
2
Press
CD
,
TUNER
,
TAPE
or
AUX
.
• Start playback of the selected source.
3
Press
RECORD
on tape deck 1 to start
recording.
™
The
REC
flag starts flashing.
4
Press
PAUSE
to interrupt recording.
5
Press
STOP
•
OPEN
on tape deck 1 to
stop recording.
Note:
– During recording, it is not possible to
listen to another sound source.
Summary of Contents for FW748P
Page 1: ...1 mini hifi system 5 speaker dolby pro logic FW748P ...
Page 4: ...4 ...
