16
English
Clock/Timer
Setting the timer
●
The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first before
the timer can be used.
●
If no button is pressed within 7 seconds during
timer setup, the system will exit timer setting
mode automatically.
1
In active mode, press and hold
CLOCK/
TIMER
for more than 2 seconds.
2
Press
TITILE-/+
¡1
/
2™
(
í
/
ë
on the
remote)
to set the hours.
3
Press
CLOCK/TIMER
again.
➜
The clock digits for the minutes flash.
4
Press
TITILE-/+
¡1
/
2™
(
í
/
ë
on the
remote)to set the minutes.
5
Press
CLOCK/TIMER
to confirm the time
➜
The timer is now set and actiated.
Activating and deactivating
TIMER
●
In standby or during playback, press
TIMER ON/OFF
once.
➜
Display shows
if activated, and disappears if
deactivated.
Setting the clock
1
In any mode, press
CLOCK/TIMER
twice.
➜
The clock digits for the hours flash.
2
Press
TITILE-/+
¡1
/
2™
(
í
/
ë
on the
remote)
to set the hours.
3
Press
CLOCK/TIMER
again.
➜
The clock digits for the minutes flash.
4
Press
TITILE-/+
¡1
/
2™
(
í
/
ë
on the
remote)to set the minutes.
5
Press
CLOCK/TIMER
to confirm the time.
Note:
– If the clock has not been set, 0:00 will be
displayed.
pg001-pg020_FWM139_79
2007.4.20, 10:50
16
