background image

14

English

Basic Functions

Automatic DSC-DBB selection

The best DBB setting is generated automatically
for each DSC selection.  You can manually select
the DBB setting that best suits your listening
environment.

1

Incredible Surround

The Incredible Surround magnifies the virtual

distance between the front speakers for an
incredibly wide, enveloping, stereo effect.

Press and hold 

DBB•INC SURR

 (or 

DBB/IS

on the remote control) until “INC SURR” is
displayed.

If activated, “

INC SURR

” is displayed.

If deactivated, “

IS OFF

” is displayed.

Note:
– Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.

Karaoke

Connecting a microphone (not supplied) to the
system allowing you to sing along with the music
source.

1

Connect microphone(s) to the 

MIC 1/2

 jack.

Before connecting the microphone, set the
microphone 

MIC VOLUME

 to the minimum

level to prevent howling sound.

2

Press 

DISC (CD 1/2/3)

TUNER

USB 

or

AUX

 to select the source to be mixed and start

playback.

3

Adjust the volume level of the source with

MASTER VOLUME

 control.

4

Adjust the microphone volume with the
microphone 

MIC VOLUME 

control.

5

Adjust the echo level with the 

ECHO 

control.

Note:
– Keep the microphone away from the speakers to
prevent howling.

Sound control

For optimal sound listening, select only one
of the following navigation sound controls
at a time : MAX, DSC or VAC.

MAX Sound

MAX sound provides the best mixture of various
sound features (DSC,  VAC, DBB, for example).

Press 

MAX SOUND

 (or 

MAX

 on the remote

control) repeatedly.

If activated, 

MAX

 

SOUND

 is shown and the

MAX SOUND button lights up.

If deactivated, “

MAX OFF

” is displayed and the

MAX button black out.

VAC (Virtual Ambience Control)

The VAC feature enables you to adjust the
system to select a type of environment.

Press 

VAC

 to select: CINEMA, HALL or

CONCERT.

The selected VAC is shown.

DSC (Digital Sound Control)

The DSC feature enables you to enjoy special
sound effects that have preset equaliser settings,
providing the best music reproduction.

1

Press 

DSC

 to select: OPTIMAL, JAZZ, ROCK or

TECHNO.

The selected DSC is shown.

DBB (Dynamic Bass Boost)

There are three DBB settings to enhance the
bass response.

1

Press 

DBB 

to select: DBB 1, DBB 2, DBB 3 or

DBB OFF.

The selected 

DBB

 is shown, except for DBB

OFF mode.

pg001-pg028_FWM583-55-Eng

2007.7.6, 17:14

14

Summary of Contents for FWM583






























Reviews: