GC2810
2-5
DISASSEMBLY ADVICE
BACKPLATE 19
CORDSET 22
BALL SWIVEL 20
Remove
screw A
Disassemble
BACKPLATE 19
Disconnect
3x quick-connectors of CORDSET 22
Disassemble
CORDSET 22
FILLING DOOR ASSY 18
INLAY PRINTED 17
SOS KNOB 15
SPRAY KNOB 16
SPRAY PUMP 9
SOS PUMP 10
LAMP ASSY 5
Disassemble
FILLING DOOR ASSY 18
Remove
screw B
Release
rear catch of INLAY PRINTED 17
Disassemble
INLAY PRINTED 17
Disconnect
2x quick-connectors of LAMP ASSY 5
Disassemble
LAMP ASSY 5
THERMOSTAT DIAL PRINTED 21
WATER TANK ASSY 7
COVER 3
INSULATION SHEET 23
DOSING SEAL 13
SOS SEAL 14
SOLEPLATE MOUNTED ASSY 1
Disassemble
THERMOSTAT DIAL PRINTED 21
Remove
screws C (3x)
Disassemble
WATER TANK ASSY 7
Remove
screws D (3x)
Disassemble
COVER 3
Note for re-assembly:
Please ensure that INSULATION SHEET 23 is put in place
during re-assembly.
This metal part acts as a heat sink to prevent softening of COVER
3 plastics at the screw location D1.
