Do not put perfume, vinegar, starch, descaling agents, ironing
aids or other chemicals in the water tank.
3
Close the water filling door ( ‘click’).
Temperature and steam setting
Table 1:
Warning: Do not use steam or steam boost at low
temperature, as indicated in the below table. Otherwise,
hot water may leak from the iron.
Fabric type
Temperature
setting
Steam
setting
Steam
boost
Linen
MAX
/ ECO
Yes
Cotton
●●●
Yes
Wool
●●
ECO
No
Silk
●●
No
Synthetic
fabric (e.g.
acrylic, nylon,
polyamide,
polyester)
●
No
1
Refer to Table 1 to set the temperature dial to the
appropriate setting for your garment.
2
Refer to Table 1 to set the appropriate steam setting for
your garment.
Note: Make sure that the steam setting you select is suitable
for the set ironing temperature.
3
Put the iron on its heel and plug it in. The temperature
light goes on to indicate that the iron is heating up.
4
When the temperature light goes out, the iron has reached
the correct temperature and you could start ironing.
ENGLISH
7
