10
ENGLISH
Before first use
This appliance is intended for ironing and refreshing fabrics only.
Remove all packaging material and stickers.
Remove the protective cover from the soleplate before you use
the appliance.
Always place the appliance on a stable and horizontal surface.
Fill the water tank before every use (see chapter ‘Using your
appliance’, section ‘Filling the water tank’).
Using your appliance
Filling the water tank
Fill the water tank before every use and when the ‘water tank
empty’ light flashes.
1
Remove the water tank from the appliance.
2
Fill the water tank with tap water up to the MAX
indication.
Note: Do not fill the water tank beyond the MAX indication to
avoid spillage. If you have overfilled the water tank, empty it
until the water level drops below the MAX indication again.
3
Put the water tank back into the appliance by sliding in
the bottom part first. Then push the top part until it locks
into place.
Tip: Your appliance has been designed to be used with tap
water. In case you live in an area with hard water, fast scale
build-up may occur. Therefore, it is recommended to use
distilled or demineralised water to prolong the lifetime of your
appliance.
Do not use perfumed water, water from the tumble dryer,
vinegar, starch, descaling agents, ironing aids, chemically
