M
D
A
T
H
I
J
U
V
A
Hanger hook
D
Air vent slide
U
Steamer power-on button with light
V
Blowing/suction button
T
Steam activator
H
Board tilting button
I
Height adjustment lever
J
Locking strap
M
Mains plug
Steaming
Put the mains plug
M
in an earthed
wall socket. The power-on light goes on.
Fill the water tank.
Undo the locking strap
J
and unfold
the ironing board to vertical position.
Set both air vent slides
D
to
the ironing position.
Take the steamer out of the steamer
compartment.
Switch the steamer on by pressing
the steamer power-on button
U
.
The power-on light goes on.
After approx. 2 minutes the
steamer is ready for use.
Press the steam activator
T
.
Never direct the steam
at people.
If you want to steam in the blowing
mode, press the rounded side of the
blowing/suction button.
If you want to steam in the suction
mode, press the hollow side of the
blowing/suction button.
You can easily hang the steamer on
the board handle
G
when necessary.
You can store the hot steamer in the
heat-resistant storage compartment
immediately after you have switched
the steamer off.
6
4
5
3
2
1
E
Steaming tips and tricks
The steamer is perfect for all delicate fabrics, such as silk,
wool and cashmere.
To steam a jacket, put it directly on the board. To steam a
blouse or a dress, use the hanger hook
A
.
•
•
2
7
