B
C
D
H
I
J
M
B
Refreshing button
C
Air vent
D
Air vent slide
H
Board tilting button
I
Height adjustment lever
J
Locking strap
M
Mains plug
Refreshing
Put the mains plug
M
in an earthed
wall socket. The power-on light goes on.
Undo the locking strap
J
and unfold
the ironing board to vertical position.
Set both air vent slides
D
the
refreshing position.
Press the refreshing button
B
on the
back of the ironing board.
The appliance starts refreshing your
garment.
This process takes 10 minutes and
automatically stops.
1
2
N
Q
This appliance is equipped with an automatic Calc-Cleaning system. When the power-on light
Q
blinks,
the Calc-Cleaning system is active. Wait
3 minutes
for the appliance to complete the Calc-Cleaning
process. During this process you cannot use the appliance.
When the power-on light
Q
stops blinking and the rinse tray light starts blinking, empty the rinse tray
N
and reinsert it. The Calc-Cleaning process is now finished and you can start using the appliance.
4
Automatic Calc-Cleaning
1
E
Refreshing tips and tricks
Perfect to remove food or cigarette smoke smells from
jackets, coats and sweaters.
Combine the refreshing mode with the steaming mode to
refresh garments and remove creases at the same time.
•
•
Storage
Fold the ironing board to the storage
position and lock the board with the
locking strap.
To store the cord, briefly pull it
towards you and then let it go.
The cord will be wound up
automatically.
You can now easily move the
appliance by pulling it along by the
board handle.
1
2
3
5
3
