29
14 Troubleshooting
If GoGear Vibe is not working properly or the
display freezes, you can reset it without losing
data:
How do I reset GoGear Vibe?
Insert a pen tip or other object into the
•
reset hole located at the left hand side of
GoGear Vibe. Hold until the player shuts
down.
If the reset option is unsuccessful, follow
•
the steps how to recover GoGear Vibe
with the
Philips Device Manager
:
1
On your computer, select
Start
>
Programs
>
Philips Digital Audio Player
>
Vibe Device Manager
>
Philips Device
Manager
to launch the
Philips Device
Manager
.
2
Turn off GoGear Vibe before you
continue.
3
Press and hold the volume button
while you connect GoGear Vibe to your
computer.
4
Keep holding the key until the
Philips
Device Manager
acknowledges GoGear
Vibe and enters the recovery mode.
5
On the computer, click the
Repair
button and follow the instructions of the
Philips Device Manager
to complete the
recovery process.
6
When the recovery is completed,
disconnect GoGear Vibe from your
computer.
7
Restart GoGear Vibe.
English
EN
