background image

Please do not use your bare hand to adjust the core 
while the light is on.

燈具點亮時請不要用手直接接觸燈頭進行調節。

Turn off the power and wait for 15mins before adjust 
the core with bare hand.

關閉電源並靜置15分鐘後,手可以直接接觸燈頭進
行調節。

ON

OFF

Inrush current

Ipeak

Twidth

15 mins

Installation  

燈具安裝

Put track adaptor into track

 align track rib with Mark.

把軌道接頭垂直放入軌道(軌道筋對準上蓋“RIB”標識)

2

Rotate adapter and right handles 90°.
90°

旋轉軌道接頭和把手。

Rib (

)

1

2

2

1

1. Please read this manual carefully before using the product. Please keep the manual for future reference.

  使用本產品前,請先仔細閱讀本手冊。請保留本手冊作為日後參照用。

2.

 The luminaire shall be installed by a qualified electrician and wired in accordance with  the latest IEEE electrical regulations or the national requirements.   

     

  燈具應由符合資格的電工安裝,接線要符合IEEE電氣標準或國家標準。 

3. 

The luminaire is complied to IEC 60598-1 or CNS14335.  

  此燈具是依據IEC60598-1 或 CNS14335標準所製造。 

 

4. Do not hot swap! Luminaire must not to be disconnected with line power turned on.  Failure to do so may damage the product.

  請不要熱插拔,軌道燈不允許在帶電的時候與軌道分開,這樣會損壞產品。

5.             

Luminaire

 

is

 

going

 

to

 

installed

 

out

 

of

 

hand

 

reach.

 

The light source of this luminaire is not replaceable; when the light source 

                reaches its end of life the whole luminaire shall be replaced

         本燈具打算安裝在伸臂範圍以外。燈具中光源不可更換;當光源壽命終結時,請更換整個燈具。

6. The manufacturer will not be held responsible for improper usage or modification to the product.

  所有不當使用或自行更改產品結構而導致的損壞,生產商不負任何責任。

7. Input voltage shall not exceed 

±10%

 

of

 

nominal voltage. 

  輸入電壓請勿超出額定電壓的±10% 。

8.

 

For

 

the

 

max

 

number

 

of

 

luminaires

 

per

 

Track,

 

please

 

refer

 

to

 

the

 

Track

 

specification.

  一根軌道可連接燈具的數量,請參照軌道規格書。

9. In case of malfunction, please switch off the power and contact your nearest Philips dealer.

  如發現異常或操作有任何問題,請務必先切斷電源,然後與飛利浦經銷商聯繫。

10. The corrosive atmosphere or hazardous materials such as sulfur, chlorine, phthalate, etc must be avoided during the use and storage.

  

燈具避免在腐蝕性環境或者含有有害物質,例如硫化物,鹵化物,鄰苯二甲酸脂等環境中存儲和使用。   

 

Maintenance

 保養方法:

1. To ensure optimum performance, please clean the product regularly (recommended twice a year). Turn off luminaire before cleaning.

  為了保持燈具明亮效果,請定期(半年一次)進行清潔。燈具清潔請在切斷電源情況下進行。

2. Do not use chemical solvents to clean the luminaire, it might damage the surface.

  請不要用香蕉水等揮發性物質擦拭燈具表面,請不要對燈具噴灑任何化學藥劑,否則燈具可能會變色或損壞。

2

1

2

電流

峰值

持續時間

Reviews: