background image

Headphone battery
replacement (figure 3)

IMPORTANT
Use only rechargeable LR03/AAA
NiMH batteries (preferably Philips).

Do not use NiCd batteries or

alkaline batteries as these may damage
your FM wireless system!

1

Open the headphone’s battery
compartment.

2

Take out the batteries and dispose of them
properly.

3

Insert new batteries. Only use LR03/AAA
NiMH batteries (preferably Philips).

4

Make sure the batteries are correctly
inserted as indicated by the engraved
symbols in the battery compartment.

5

Close the battery compartment.

IMPORTANT
Before using the FM headphone for the
first time, please ensure that the
batteries are fully charged for about 
16 hours.This will guarantee a longer
operating lifetime of the batteries.

Connecting the FM transmitter to a
headphone output of an audio
source (figure 4)

1

Connect the 3.5mm stereo plug of the
stereo audio cable to the headphone
output of an audio source, such as TV, HiFi
or PC.
– In case your audio source has a 6.3mm

headphone output, use the supplied
3.5mm to 6.3 mm stereo adapter plug.

2

Switch on your audio source and carefully
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.

3

Switch on the headphone.You may hear a
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.

4

To tune, turn the tuning wheel until the
signal is at its clearest and the tuning
indicator will light up.

5

Adjust the volume to the desired level with
the headphone volume control.

Basic operation

When the FM transmitter is connected to a
headphone output of an audio source.

1

Switch on your audio source and carefully
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.

2

Switch on the headphone.You may hear a
hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.

3

To tune, turn the tuning wheel until the
signal is at its clearest and the tuning
indicator will light up.

4

Adjust the volume to the desired level with
the headphone volume control.

Installation

Audio Connections

7

English

XP SBC HC 300  12-06-2001 12:56  Pagina 7

Summary of Contents for HC300











Reviews: