Diagnosing Internal Failures
3
-
6
Troubleshooting
z
To store the configuration settings on a data card, select
Save Settings
to Data Card
and press
. When prompted with
Save Settings to
Data Card?
press
.
z
To load configuration settings from a Data Card, select
Load Settings
from Data Card
and press
. When prompted with
Load Settings
from Data Card?
press
.
z
To exit Configuration Mode, turn the unit off. Wait 2 seconds.
Remove the Data Card by pressing the black eject button and pulling
the Data Card from the compartment.
Figure 3-1 Softkey Numbers
Accessing Diagnostic Mode
These instructions describe how to enter Diagnostic Mode. The Diagnostic
Mode allows printing of the System Log (see "Printing the System Log" on
page 3-6). It also allows running the Extended Self Test and other Diagnostic
Tests. For details of running these tests, see "Diagnostic Tests" on page 2-16.
1. Make sure the power is off.
2. Press softkeys 4 and 6 at the same time, and hold them down while turn-
ing the power on. See Figure 3-1 for softkey numbering.
3.
Wait for the Diagnostic software to initialize. This will take several
seconds. The unit is ready to proceed when the screen cursor
responds to softkey inputs.
z
To select a function, press the
and
softkeys to move up or
down the list until the desired function is highlighted. Then press the
softkey to begin that function.
z
To exit Diagnostic Mode, turn the instrument off.
Printing the System Log
These instructions describe how to print the system log, which includes the
unit’s serial number, hardware configuration, and a listing of error codes.
1. Enter Diagnostic Mode as described in "Accessing Diagnostic Mode".
ENTER
SAVE
ENTER
LOAD
ECG Size
Volume
Contrast
ENTER
Summary of Contents for Heartstart XLT
