6
Cleaning
Always unplug the appliance and let it cool down before
cleaning.
• You can clean the outside of the appliance with a damp
cloth (fig. 16).
Make sure that no water runs into the appliance (fig. 17).
Do not use abrasives or scourers, or liquids such as
alcohol, petrol or acetone.
• From time to time the tube lamps, reflectors and the inner
side of the opalescent screen need cleaning (figs. 18-21).
-
Remove the screen by pressing the clips gently with a
screwdriver (fig. 20).
Replacing the tube lamps
After approx. 10.000 hours (many years in normal use) we
advise you to replace the tube lamps.
Have the tube lamps replaced only by Philips Original
Bright Light PL-L 55W.
You can have the tube lamps replaced by authorized service
personnel or replace them yourself. If you wish to replace the
lamps yourself:
-
Remove the screen (figs. 18 and 19).
-
Bend the bracket, which keeps the lamp to its place, a little
sidewards and remove it (fig. 22).
-
Press the red button and pull the tube lamp forward, out of
the lampholder (fig. 23).
-
When placing a tube lamp, follow these instructions in
reverse order (figs. 24 and 25).
Note: While sliding the tube light into the lampholder you
need not press the red button. As soon as you hear a
‘Click!’, the lamp is placed correctly.
The tube lamps contain substances which may pollute the
environment. When discarding lamps, please ensure that they
are separated from the normal household refuse and that they
are disposed of at an officially assigned place.
Replacing the mains cord
If the mains cord of this appliance is damaged, it must only be
replaced by Philips or their service representative, as special
tools and/or parts are required.
This appliance meets the requirements of MDD 93/42/EEC for medical
appliances.
21
20
16
17
18
19
22
CLICK
23
1
2
24
CLICK
25
CLICK
Summary of Contents for HF3301
