removing the rechargeable battery
(optional)
If you choose to remove the rechargeable battery
of the massager yourself before you hand it in at an
official collection point, follow the instructions below.
Only remove the battery when it is completely
empty to avoid a hazard. Never let the battery
come into contact with metal.
Do not use sharp tools, such as knives or
screwdrivers, to open the massager.
1
Let the massager operate until it stops.
2
Put the massager in the battery-removal bag
supplied.
3
Put the battery-removal bag with the massager
in it in the freezer for at least 24 hours.
4
Take the bag from the freezer. Immediately put
the bag on the ground and stamp on it with
your foot to break the massager.
Caution: Only do this while wearing solid shoes.
Attempting this with bare feet could cause injuries.
Note: If the above treatment has not broken the
massager, repeat steps 3 and 4. Use a strong plastic
bag if the battery removal bag supplied is damaged.
5
Open the bag and take out the massager parts.
6
Unscrew the printed circuit board from
the rechargeable battery with a flat-head
screwdriver.
Do not allow metal objects to contact the battery
terminals or short-circuit the battery.
EnglisH
15
Summary of Contents for HF8420
