Philips HFC 242, User Manual

3

Installation Guide

Package Contents

Packing content PSE

‚

 Device

ƒ

 Handset

„

 Spiral cable for handset

…

 Power cord with plug (country-specific)

†

 Telephone cord with plug (country-specific)

‡

 Paper roll

User Manual

User manual with installation guide (not depicted)

Verpackungsinhalt

Missing Package Contents

Inserting Paper

1

Open the paper tray, and insert the paper roll.

2

Place the front edge of the paper into the paper guide.
Pull the paper forwards, until the panel is covered.

3

Close the paper tray, and cut off the paper over the panel.

Red Line

Connecting the Handset

Connecting the Handset

Plug one end of the spiral cable into the socket on the tel-
ephone handset. Insert the other end into the socket desig-
nated with the 

H/S

 symbol.

Connecting the Telephone Cable

Connecting the Telephone Cable

Connect the telephone cord to the device by inserting it in
the socket designated with 

LINE

 (RJ-11-Connector). Insert

the telephone plug into your telephone connection socket.

Telefonkabel anschliessen

Connecting the Power Cable

Power Type at Setup Location

Connecting the Power Cable

Insert the power cable into the connection located on the
rear side of the machine. Connect the power cable to the
electrical socket.

If one of the parts is missing or damaged, please con-
tact your retailer or our customer service.

If a red line appears on the printout, the paper supply
is almost over. Insert a new paper roll into the device.

Check whether the power type of your machine (in-
dicated on the type plate) matches the power type
available at the setup location.