32
Note: For the welcome picture, there is a color lookup table used that is limiting the number of colors available to
display. This can result in certain display color artifacts and using a limited number of different color values can improve
this. Once this feature is configured and set the welcome image will be displayed within 14 seconds after switch on.
This page will remain until a key on the RC is pressed.
12.
Clone
With cloning it is possible to copy to/from a USB device the configuration data and the channel list data from a TV.
Place a USB Memory stick in the USB side connector of the TV.
*The USB device should be formatted as FAT or FAT32.
Access the Hotel Mode Menu with the RC 8573 (yellow remote) or with the guest remote by entering the key sequence
3,1,9,7,5,3,MUTE and navigate with the TV remote to following items:
[Copy from USB]
1. Select [Copy from USB] and press OK.
2. The clone data will be loaded from the USB device into the TV.
There can be multiple clone files stored on one USB drive. They are identified by an increasing number added
to the directory name. If multiple clone files are available a file explorer will be shown to select the correct one.
3. Wait until the OSD message returns to its earlier state before removing the USB device.
4. Power down the TV and remove the USB device.
[Copy to USB]
1. Select [Copy to USB] and press OK.
2. The clone data will be loaded from the TV into USB device.
There can be multiple clone files stored on one USB drive. They are identified by an increasing number added to
the directory name. If multiple clone files are available a file explorer will be shown to select the correct one.
3. Wait until the OSD message returns to its earlier state before removing the USB device.
