cleaning and maintenance
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
Never rinse the appliance or the adapter under the tap (Fig. 18).
Keep the appliance and the adapter dry (Fig. 19).
cleaning the epilating head
1
Switch the appliance off, remove the adapter from the wall socket
and pull the appliance plug out of the appliance (Fig. 0).
Remove the epilating head (Fig. 21).
Remove loose hairs with the brush supplied (Fig. 22).
Rinse the epilating head under the tap for 5-10 seconds while
turning it (Fig. ).
5
Shake the epilating head firmly and dry it thoroughly with a tea
towel. The epilating head should be completely dry before you
place it back onto the appliance (Fig. ).
cleaning the shaving head
1
Switch the appliance off, remove the adapter from the wall socket
and pull the appliance plug out of the appliance. (Fig. 5)
Remove the shaving foil from the shaving head (Fig. 26).
Clean the shaving foil, the cutter block and the hair chamber with
the brush supplied.
Do not exert any pressure on the shaving foil to avoid damage.
Put the protection cap on the shaving head after use.
5
Rub a drop of sewing machine oil onto the shaving foil twice a year.
replacement
If you use the appliance two or more times a week, we advise you to
replace the shaving foil and the cutter block every 1 to 2 years.
,
,
EnglisH
10
Summary of Contents for HP2844/02
