Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure electromagnetic fields.
General
- This epilator is waterproof. It is suitable for use in the bath or shower
and for cleaning under the tap. For safety reasons, the epilator can
therefore only be used without cord.
- The appliance is suitable for mains voltages ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe low voltage of less than
24 volts.
- Maximum noise level: Lc = 77dB(A).
General description (Fig. 3)
1 Trimming comb
2 Shaving head
3 Double wavy massage attachment
4 Sensitive area cap
5 Skin stretcher
6 Epilating discs
7 Epilating head
8 On/off button
- press once for speed II
- press twice for speed I
- press three times to switch off
9 Charging light (white) with battery-low indication (red)
10 Socket for small plug
11 Adapter
12 Storage pouch
13 Cleaning brush
Preparing for use
Charging
Charging the epilator takes approximately 1 hour. When the epilator is fully
charged, it has a cordless operating time of up to 30 minutes.
1
Switch off the appliance before you charge it.
2
Insert the appliance plug into the socket in the bottom of the
appliance (1) and put the adapter in the wall socket (2).
,
The charging light flashes white to indicate that the appliance is
charging.
ENGLISH
6
