The appliance and the adapter may only be cleaned with the brush
supplied.
1
Make sure the appliance is switched off and disconnected from
the mains before you start cleaning it.
2
Remove the comb attachment.
C
3
Open the cutting unit by applying pressure to the centre of the
unit.
C
4
Clean the cutting unit and the inside of the appliance with the
brush supplied.
C
5
Close the cutting unit by pushing it back onto the appliance
until you hear a click.
The appliance does not need any lubrication.
Replacement
A worn or damaged cutting unit should only be replaced with an
original Philips cutting unit.
C
1
Open the cutting unit by applying pressure in the centre and
then remove it by pulling it upwards.
C
2
Place the two lugs of the new cutting unit into the guiding slots
and push the unit back onto the appliance.
ENGLISH
7
Summary of Contents for HQC888/00
