Timer
• With the timer you can programme how long and at what
speed you want the air cleaner to run. You can, for instance,
use the timer if you want the air cleaner to run when
someone is smoking and/or a few hours after someone has
been smoking.
The timer may also come in handy if you use the air cleaner
every day for the same period of time.
After you have activated the timer, it will count down the set
time and finally switch the air cleaner off.
• You can programme either the ‘Auto’ position or a particular
speed.
Setting/changing the timer
- Switch the air cleaner on (fig. 25).
- Select the desired speed by pressing the ‘Auto’ setting
control or setting the speed control to the desired position.
- Press the ‘time setting’ control (M) twice (fig. 26).
On the display, the ‘OFF’ symbol appears as well as
0
:
00
or
the already programmed operating time.
- Press the
▲
or
▼
control to set the operating time (accurate
to a minute) (fig. 27).
- Press the ‘time setting’ control (M) (fig. 28).
The ‘OFF’ symbol remains visible and the timer symbol
Ò
appears on the display.
After three seconds the colon starts blinking to indicate that
the set operating time is being counted down.
• Note that if the timer symbol
Ò
starts blinking and/or goes
out while you are setting the timer, the timer has not been
set properly. In this case, set the timer again.
-
When the set period has elapsed, the air cleaner switches
off. The light in the display and the pilot light above the
on/off control go out and the ‘OFF’ and timer symbol
Ò
disappear.
• The programme is stored in the memory and can be
recalled by means of the ‘time setting’ control when the
appliance is used again (see ‘Recalling the timer setting).
Switching the timer off
-
To switch the timer off or to
interrupt the timer
programme, press the ‘time
setting’ control for at least 3
seconds (fig. 29).
The clock appears on the
display.
Recalling the timer setting
If you have previously programmed an operating time, you can
quickly and easily recall this programme and use it again:
-
Switch the air cleaner on (fig. 30).
-
Press the ‘time setting’ control (M) for at least 3 seconds
until the ‘OFF’ symbol and the timer symbol
Ò
appear on the
display (fig. 31).
The previously programmed operating time appears and the
timer starts running.
Viewing the clock while the timer is running
You can view the clock while
the timer is counting down by
pressing the ‘time setting’
control (M) once (fig. 32). The
clock then appears on the
display for a few seconds. After
that, the timer reappears.
7
;;;;;;
;;;;;;
;;;;;;
;;;;;;
25
;;;;;;
;;;;;;
;;;;;;
;;;;;;
30
;;;;;
;;;;;
32
;;;;;
;;;;;
31
3 sec.
;;;;;
;;;;;
28
;;;;;
;;;;;
27
;;;;;
;;;;;
29
3 sec.
;;;;;
;;;;;
26
