20
EN
6 Guarantee and
service
If you have a problem, need service, or need
information, see
www.philips.com/support
or contact the Philips Consumer Care Center
in your country. The phone number is in
the worldwide guarantee leaflet. If there is
no Consumer Care Center in your country,
go to your local Philips dealer.
5 Cleaning
Warning
•
Before you clean the appliance, unplug it.
•
Refer to the table (Fig. 11) for information on cleaning the
parts with water, dishwashing machine and/or moist cloth.
Caution
•
Make sure that the cutting edges of the blades and discs
do not come into contact with hard objects. This may
cause the blade to get blunt.
•
The cutting edges are sharp. Be careful when you clean the
discs, and blade units of the food processor, blender, and mill.
1
Clean the motor unit with a moist cloth.
2
Clean the other parts in hot water
(< 60ºC) with some washing-up liquid or
in a dishwasher.
3
Store the appliance and accessories in a
dry place after cleaning.
Quick cleaning
Follow the steps below to clean the food
processor bowl and blender jar easier.
(Make sure that the blade is assembled in the
bowl if you clean the food processor bowl.)
1
Pour lukewarm water (not more than
0.5 liters) and a few drops of washing-up
liquid into the food processor bowl or
blender jar.
2
Place the lid on the food processor bowl
or blender jar, and then turn it clockwise
to fix it.
3
Turn the knob to speed P. Let the
appliance run for 30 seconds or until the
food processor bowl or blender jar is
clean.
4
After use, turn the knob to
0
position and
then unplug the appliance.
5
Detach the blender jar or food processor
bowl and rinse it with clean water.
