19
Set up wireless connection manually
1
In standby mode, press and hold
SOURCE
on the main unit for 3 seconds.
The blue and green indicators on the
»
subwoofer fl ash alternately.
»
[PAIRING]
(pairing) fl ashes.
2
Press and hold
PAIR
on the subwoofer for
3 seconds.
»
[PAIR OK]
(pair OK) and are
displayed and the blue indicators on
the subwoofer lights up.
3
Turn on the main unit again.
Note
If the wireless connection fails again, check whether
•
there is any confl ict or strong interference (for example,
interference from other electronic devices) around
your location. After removal of the confl ict or strong
interference, repeat the above procedures.
4
Press
SET TIME/PROG
to confi rm the
clock setting.
Turn on
1
Press
.
The soundbar switches to the last
»
selected source.
2
Wait for automatic setup of wireless
connection between the main unit and
subwoofer.
»
[PAIRING]
(pairing) fl ashes.
If the connection succeeds,
»
[PAIR OK]
(pair OK) and
are displayed and
the blue indicator on the subwoofer
lights up.
If the connection fails,
»
[PAIR FAIL]
(pair fail) is displayed and the green
indicator on the subwoofer lights up.
If the wireless connection fails, set up
»
the connection manually.
Switc
h
to standby mode
To switc
h
t
h
e soundbar to standby mode:
1
Press
.
The clock (if set) is displayed.
»
To switc
h
t
h
e soundbar to Eco Power Standby
mode:
1
Press and hold to switch the soundbar
to Eco Power Standby mode.
The backlight on the display panel
»
turns off.
The blue Eco Power indicator lights up.
»
Englis
h
EN
