8
EN
3 Connect and set
up
This section helps you connect your home
theater to a TV and other devices, and then set
it up.
For information about the basic connections
of your home theater and accessories, see the
quick start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Speakers
Position, connect, and set up your speakers for
best surround sound.
Position
Speaker position plays a critical role in setting
up a surround sound effect.
For best results, place your speakers and the
subwoofer as shown below.
Note
•
Surround sound depends on various factors such as
room shape and size, type of wall and ceiling, windows
and reflective surfaces, and speaker acoustics.
Follow these general guidelines, and then set up
your speakers.
1
Seating position:
This is the center of your listening area.
2
SPEAKER LEFT
(speaker left) and
SPEAKER RIGHT
(speaker right) speakers:
Place the left and right speakers in the
front, and equidistant from the main unit
in an arc, so that the two speakers are at
same distance from your seating position.
For best effect, point the speakers towards
the seating position and place the speakers
close to the ear level (when seated).
3
SUBWOOFER
(subwoofer):
Place the subwoofer at least one meter to
the left or right of the TV. Leave about ten
centimeter clearance from the wall.
Connect
Connect your speakers and the subwoofer to
your home theater as described in the quick
start guide.
Summary of Contents for HTB3260
Page 2: ......
