background image

13

EN

•  The device is not correctly connected. 

Connect the device correctly. (see 'Play 

audio through Bluetooth' on page 10)

•  The SoundBar is already connected with 

another Bluetooth device. Disconnect the 

connected device, then try again.

Quality of audio play from a connected 

Bluetooth device is poor.

•  The Bluetooth reception is poor. Move the 

device closer to the SoundBar, or remove 

any obstacle between the device and the 

SoundBar.

The connected Bluetooth device connects and 

disconnects constantly.

•  The Bluetooth reception is poor. Move the 

device closer to the SoundBar, or remove 

any obstacle between the device and the 

SoundBar.

•  Turn off Wi-Fi function on the Bluetooth 

device to avoid interference.

•  For some Bluetooth, the Bluetooth 

connection can be deactivated 

automatically to save power. This does not 

indicate any malfunction of the SoundBar.

8 Notice

This section contains the legal and trademark 

notices.

Notice of compliance

The device complies with the FCC rules, Part 

15. Operation is subject to the following two 

conditions:

This device may not cause harmful 

interference, and

This device must accept any interference 

received, including interference that may 

cause undesired operation.

FCC rules

This equipment has been tested and found 

to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in a 

residential installation. This equipment generates, 

uses and can radiate radio frequency energy 

and, if not installed and used in accordance 

with the instruction manual, may cause harmful 

interference to radio communications.

However, there is no guarantee that 

interference will not occur in a particular 

installation. If this equipment does cause harmful 

interference to radio or television reception, 

which can be determined by turning the 

equipment off and on, the user is encouraged 

to try to correct the interference by one or 

more of the following measures:

•  Relocate the receiving antenna.

•  Increase the separation between 

equipment and receiver.

•  Connect the equipment into an outlet on 

a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced 

radio/TV technician for help.

Summary of Contents for HTL1170B





















Reviews: