background image

4

EN

Risk of contamination!

• 

Do not mix batteries (old and new or 

carbon and alkaine, etc.).

• 

Danger of explosion if batteries are 

incorrectly replaced. Replace only with the 

same or equivalent type.

• 

Remove batteries if they are exhausted or 

if the remote control is not to be used for 

a long time.

• 

Batteries contain chemical substances, they 

should be disposed of properly. 

Risk of swallowing batteries!

• 

The product/remote control may contain 

a coin/button type battery, which can be 

swallowed. Keep the battery out of reach 

of children at all times! If swallowed, the 

battery can cause serious injury or death. 

Severe internal burns can occur within two 

hours of ingestion.

• 

If you suspect that a battery has been 

swallowed or placed inside any part of the 

body, seek immediate medical attention.

• 

When you change the batteries, always 

keep all new and used batteries out of 

reach of children. Ensure that the battery 

compartment is completely secure after 

you replace the battery.

• 

If the battery compartment cannot be 

completely secured, discontinue use of the 

product. Keep out of reach of children and 

contact the manufacturer.

 

This is CLASS II apparatus with double 

insulation, and no protective earth provided.

Care for your product

 Use only microfiber cloth to clean the product.

Care of the environment

 

Your product is designed and manufactured 

with high quality materials and components, 

which can be recycled and reused.

 

When this crossed-out wheeled bin symbol is 

attached to a product it means that the product 

is covered by the European Directive 2002/96/

EC. Please inform yourself about the local 

separate collection system for electrical and 

electronic products.

Please act according to your local rules and 

do not dispose of your old products with your 

normal household waste.

Correct disposal of your old product helps to 

prevent potential negative consequences for the 

environment and human health.

  

Your product contains batteries covered by the 

European Directive 2006/66/EC, which cannot 

be disposed with normal household waste.

Please inform yourself about the local rules 

on separate collection of batteries because 

correct disposal helps to prevent negative 

consequences for the environmental and 

human health.

Summary of Contents for HTL2150
















Reviews: