11
EN
• The maximum operational range between
the main unit and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press on the remote control to switch
this product to Bluetooth mode.
»
BT
is displayed on the display panel,
blinking.
2
On the Bluetooth device, switch on
Bluetooth, search for and select
Philips
HTL3150
to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
»
During connection,
BT
on the display
panel blinks.
3
Wait until this product beeps.
»
When the Bluetooth connection
succeeds,
BT
is displayed on the display
panel.
»
If the connection fails,
BT
on the
display panel blinks continuously.
4
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused. Play resumes when the
call ends (this feature is dependent on
the connected mobile phone).
• If your Bluetooth device supports
AVRCP profile, on the remote control
you can press / to skip to a track,
or press
to pause/resume play.
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•
If you want to connect this product with another
Bluetooth device, press and hold on the remote
control to disconnect the currently connected
Bluetooth device.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the
AUDIO IN
connector on this product.
2
Press
AUDIO IN
on the remote control.
3
Press the buttons on the MP3 player to
select and play audio files or music.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
•
An MP3 file on a USB storage device
1
Connect a USB storage device to this
product.
2
Press
USB
on the remote control.
3
Use the remote control to control play.
• Press
to start, pause or resume play.
• Press / to skip to the previous or
next track.
• During USB play, press and hold
USB
to enter repeat mode, then press
USB
to select one of the following play
modes.
•
ONE RPT
: repeat the current track.
•
ALL RPT
: repeat all the tracks in
one folder.
•
SHUFFLE
: play randomly in one
folder.
•
OFF RPT
: exit repeat or shuffle
play mode.
