16
EN
Set the delay time for speaker output
Note
This setting is only applicable to centre and rear
speakers only.
•
1
Press
SURROUND
to switch to multi-
channel surround mode.
2
Press
PROGRAM
to access speaker setting
mode.
3
Press
.
/
>
to select the speaker
which you want to set the delay time, then
press
PROGRAM
.
‘CENTER DELAY’ - for centre speaker.
‘REAR DELAY’ - for rear speakers.
4
Press
VOL
+
/
-
to set the delay time,
then press
PROGRAM
.
The last volume setting will be stored
automatically after 5 seconds of
inactivity.
5
Repeat steps 3~4 for other speaker
settings.
6
To exit the menu, press
.
/
>
until
‘
EXIT
’ is displayed, then press
PROGRAM
.
Tips
If the volume control is not adjust within 5 seconds, it
resumes normal volume control function.
Set longer delay time if the centre or rear speakers
are closer to the listening position than the front
speakers.
•
•
•
Select a play source
On the main unit
1
Press
SOURCE
button repeatedly to
select:
COAX IN1 >
COAX IN2 >
OPTI IN >
AUX1
>
AUX2 >
FM
>
MP3 LINK
...
On the remote control
Press
RADIO
to switch to FM band.
Press
DI/AUX
repeatedly to listen to the
audio output from the external device.
MP3 LINK
to listen to the MP3 device that
is connected to the MP3 LINK socket.
Display
Device connected to
AUX1
AUDIO IN-AUX1 sockets.
AUX2
AUDIO IN-AUX2 sockets.
COAX IN1
DIGITAL IN-COAXIAL 1
socket.
COAX IN2
DIGITAL IN-COAXIAL 2
socket.
OPTI IN
DIGITAL IN-OPTICAL
socket.
MP3 LINK
MP3 LINK socket.
•
•
•
1_htr3465_98_eng3_final815.indd 16
1_htr3465_98_eng3_final815.indd 16
2008-04-10 5:32:20 PM
2008-04-10 5:32:20 PM
