18
EN
Note
This unit can store up to a maximum of 40 radio
stations.
If auto installation is not activated or less than 5 radio
stations are stored, ‘AUTO INSTALL’ will be displayed
again the next time you turn on to radio mode.
•
•
Listen to radio
1
Press
RADIO
.
2
Use the remote control to control the
radio.
Button
Action
Select a preset radio station.
Tune the radio frequency
backward/ forward.
Press and hold this button to
delete the preset station.
The preset number for
other radio stations
remain unchanged
•
Reinstall all the radio stations
1
Press
RADIO
.
2
Press and hold
PROGRAM
until ‘START’ is
displayed.
All previously stored radio stations will
be replaced.
Note
If no stereo signal is detected or less than 5 (
fi
ve)
stations are detected during radio installation,
‘CHECK ANTENNA’ is displayed.
•
Search and store radio stations
individually
1
Press
RADIO
.
2
Press
.
The radio frequency indication starts to
change until a radio station is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
To
fi
netune the radio frequency, press
vV
.
4
Press
PROGRAM
.
If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
5
Press
. >
(or the
numeric buttons
)
to select a preset number to store.
6
Press
PROGRAM
to con
fi
rm.
Change tuning grid
In some countries, the frequency step between
adjacent channels in FM band is 50 kHz or
100 kHz.
Note
This feature only applicable for certain region.
Change tuning grid erases all preset radio stations.
•
•
1
Press
RADIO
repeatedly to select ‘FM’
band.
2
Press
x
.
3
Press and hold
B
until ‘GRID 9’ or ‘GRID
10’ is displayed.
‘GRID 9’ for 50 kHz and ‘GRID 10’ for
100 kHz.
•
•
•
1_htr3465_98_eng3_final815.indd 18
1_htr3465_98_eng3_final815.indd 18
2008-04-10 5:32:20 PM
2008-04-10 5:32:20 PM
