16
Select a play source
On the main unit
Press
•
SOURCE
button repeatedly to
select:
DISC
>
USB
>
FM
>
AUX 1
>
AUX 2
>
DISC
...
On the remote control
Press
•
AUDIO SOURCE
repeatedly to
switch to the connected audio source.
Display
Device connected to
AUX 1
AUDIO IN-AUX 1 jacks
AUX 2
AUDIO IN-AUX 2 jacks
Press
•
RADIO
to switch to FM band.
Press
•
USB
to switch to USB mode.
Press
•
DISC
to switch to disc mode.
2
Press
to change the volume level,
then press
OK
.
The test tone is emitted from the
»
speaker.
Repeat the above setting for other
•
speakers until all the speakers output
level sounds equally balance.
To exit the menu, press
•
SETUP
.
To set the output delay time (center and rear
speakers only)
1
Select
[Speakers Delay]
in the menu,
then press .
2
Press
to set the delay time, then press
OK
.
Repeat the above setting for other
•
speakers until the sound output from
different speakers reach the listening
position at the same time.
To exit the menu, press
•
SETUP
.
Tip
Set a longer delay time if the center speaker or
•
rear speaker is closer to the listening position
than the front speaker.
Allow 1ms setting for every 1 foot distance
•
between the speaker and the listening position.
Speakers Distance Setup
Center
Rear Left
Rear Right
0MS
0MS
0MS
EN
hts3021_94_eng1.indd Sec1:16
hts3021_94_eng1.indd Sec1:16
1/14/2009 5:46:07 PM
1/14/2009 5:46:07 PM
