10
Option 2: Connect to the component
video jack
1
Connect the component video cable
(not supplied) to the
Y Pb Pr
jacks on
this Home Theater System and the
COMPONENT VIDEO input jacks on the
TV.
If a progressive scan TV is used, you
•
may turn on the progressive scan
mode. (see ‘Get started’ > ‘Turn on
Progressive Scan’).
Note
The component video input jack on the TV
•
might be labeled as Y Pb/Cb Pr/Cr or YUV.
This type of connection provides good picture
•
quality.
VIDEO OUT
Pb
Pr
Y
Pb
Pr
Y
Connect video cables
Connect this Home Theater System to TV to
view disc play. Select the best video connection
that the TV can support.
Option 1: Connect to the VIDEO jack
•
(for a standard TV).
Option 2: Connect to the component
•
video jacks (for a standard TV or
Progressive Scan TV).
Note
You must connect this Home Theater System
•
directly to a TV.
Option 1: Connect to the Video
(CVBS) jack
1
Connect a composite video cable to
the
VIDEO
jack on this Home Theater
System and the VIDEO input jack on the
TV.
Note
The video input jack on the TV might be
•
labeled as A/V IN, VIDEO IN, COMPOSITE or
BASEBAND.
This type of connection provides standard
•
picture quality.
VIDEO
VIDEO IN
EN
1_hts3172_93_eng1b.indd Sec1:10
1_hts3172_93_eng1b.indd Sec1:10
1/14/2009 2:59:37 PM
1/14/2009 2:59:37 PM