17
Select a play source
On the main unit
Press
•
SOURCE
button repeatedly to
select:
DISC
>
USB
>
FM
>
AUX 1
>
AUX 2
>
MP3 LINK
>
DISC
...
On the remote control
Press
•
AUDIO SOURCE
repeatedly to
switch to the connected audio source.
Display
Device connected to
AUX 1
AUDIO IN-AUX 1 jacks
AUX 2
AUDIO IN-AUX 2 jacks
MP3 LINK
MP3 LINK jack
Press
•
RADIO
to switch to FM band.
Press
•
USB
to switch to USB mode.
Press
•
DISC
to switch to disc mode.
2
Press
to change the volume level,
then press
OK
.
The test tone is emitted from the
»
speaker.
Repeat the above setting for other
•
speakers until all the speakers output
level sounds equally balance.
To exit the menu, press
•
SETUP
.
To set the output delay time (center and rear
speakers only)
1
Select
[Speakers Delay]
in the menu,
then press .
2
Press
to set the delay time, then press
OK
.
Repeat the above setting for other
•
speakers until the sound output from
different speakers reach the listening
position at the same time.
To exit the menu, press
•
SETUP
.
Tip
Set a longer delay time if the center speaker or
•
rear speaker is closer to the listening position
than the front speaker.
Allow 1ms setting for every 1 foot distance
•
between the speaker and the listening position.
Speakers Volume Setup
Front Left
Front Right
Center
Subwoofer
Rear Left
Rear Right
0dB
0dB
0dB
0dB
0dB
0dB
Speakers Distance Setup
Center
Rear Left
Rear Right
0MS
0MS
0MS
Get star
ted
English
EN
1_hts3172_93_eng1b.indd Sec1:17
1_hts3172_93_eng1b.indd Sec1:17
1/14/2009 2:59:37 PM
1/14/2009 2:59:37 PM
