4-1
Software upgrade
A. Software upgrade method:
1.Copy the bin file as "HTS3201_XX.bin".
2.Copy the renamed bin file(upgrade file) to the root menu of USB device.
3.Connect the USB device to HTS,and switch to USB source;
4.If the CD is correct,it will display the Upgrade Menu,press the PLAY key on the
remote control to start upgrade
5.Afer a while,the tray will open automatically ,but must not power off the player.
6.Don't power off,wait until the player reset automatically,the whole upgrade
process may need 2 minutes.HTS will auto standby after complete upgrade.
B. Read out the software versions to confirm upgrading
Follow the steps shows below:
SETUP—>Preference Setup
>Version Info.
While it shows the dialog box, we can see some information like below:
For example:
Upgrade file name
:
HTSxxxx/xx.bin
version:xx.xx.xx.xx
Sub-ver:xx.xx.xx.xx
Servo: xx.xx.xx.xx
Risc: xx.xx.xx.xx
HDCP KEY:PASS(FAIL)
Region Code:X
8032: xx.xx.xx.xx
Caution: The set must not be power off during
upgrading, Otherwise the Main board will be
damaged entirely.
Summary of Contents for HTS3201/12
