18
Play multimedia content
Note
•
Before playing multimedia content from the
computer, ensure that the home theater is
connected to the computer network and the
media server software is properly set up.
1
Press
(
Home
).
»
The home menu appears.
2
Select
[browse PC]
, then press
OK
.
»
A content browser appears.
3
Select a le, then press
OK
.
4
Press the playback buttons to control play
(see ‘Play a disc’ on page 14 ) .
Play from radio
The home theater can store up to 40 radio
stations.
1
Check that the FM antenna is connected.
2
Press
RADIO
.
»
“
AUTO INSTALL...PRESS PLAY
’ appears
on the display panel if you have not
installed any radio stations. Press (
Play
).
3
Press the following buttons to control play:
Button
Action
/
Selects a preset radio station.
Navigation
buttons
(left/right)
Searches for a radio station.
Navigation
buttons
(up/
down)
Fine tunes a radio frequency.
Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.
OPTIONS
/
(
Options
)
Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for ve
seconds to reinstall radio stations.
RADIO
Toggles between stereo and
mono sound.
Set up media server software
Before you start:
•
Connect your home theater to your
home network (see ‘Connect to a
computer network and the Internet’
on page 12 ) .
•
Connect your PC to the same home
network.
•
Make sure that your PC rewall allows
you to run Windows Media Player
programs.
In Microsoft Windows Media Player 11
1
Connect the home theater to a network
router (see ‘Connect to a computer
network and the Internet’ on page 12 ) .
2
Switch on the computer and router.
3
Open Windows Media Player on the
computer.
4
Select
Library
>
Media Sharing
, then select
settings to share your media.
5
Select
Library
>
Add to Library
, then select
settings to share the folder containing your
media.
6
Select
Advanced options
, then add the
folders to share.
7
Select
Library
>
Apply Media Information
Changes
to activate the changes.
In Macintosh OS X Twonky Media (v4.4.2)
1
Connect the home theater to a network
router (see ‘Connect to a computer
network and the Internet’ on page 12 ) .
2
Switch on the Macintosh and router.
3
Visit www.twonkymedia.com to purchase
the software or download a free 30-day
trial to your Macintosh.
4
Open Twonky Media on the Macintosh.
»
The media sharing setting is turned on by
default, thus enabling you to directly add
folders for media sharing.
5
Select
Basic Setup
>
Sharing
, then select
settings to add a folder location or add
more folders.
6
Select
Save Changes
to activate the
changes.
EN
