33
DVD Setup Menu Options
(continued)
TIPS:
The underlined option is the factory default setting.
To return to the previous menu, press
1
. To remove the menu, press
SETUP
.
Accessing to Audio Setup
Page
1
Press
DISC
and followed by
SETUP
on
the remote.
2
Press
1
2
to select ‘AUDIO SETUP
PAGE.’
3
Press
OK
to confirm.
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
Speaker Setup
These menus contain speaker setup
options that allow you to adjust the
individual speakers volume and delay time.
For details, see page 43.
Night Mode - turning on/off
When night mode is activated, the high
volume outputs are softened and low
volume outputs are brought upward to
an audible level (for DVD only.) It is
useful for watching action movies without
disturbing others at night.
1
In ‘AUDIO SETUP PAGE,’ press
34
to
highlight {
NIGHT MODE
, } then press
2
.
{
ON
}
Select this to level out the volume.
{
OFF
}
Select this when you want to enjoy the
surround sound with its full dynamic range.
2
Press
34
to select a setting and press
OK
to confirm.
CD Upsampling
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality.
If you have activated the CD
upsampling, the system will
automatically switch to stereo mode.
1
In ‘AUDIO SETUP PAGE,’ press
34
to
highlight {
CD UPSAMPLING
, } then
press
2
.
{
OFF
}
Select this to disable CD-upsampling.
{
88.2 kHz (X2)
}
Select this to convert the sampling rate of the
CDs twice higher than the original.
2
Press
34
to select a setting and press
OK
to confirm.
Helpful Hint:
– If you press SURR button on the remote
control to select “Multi-Channel” mode, it will
disable the CD upsampling feature.
