48
EN
9 Troubleshooting
Main unit
The buttons on this unit do
not work.
Disconnect this unit from the power outlet for a few minutes,
then connect again.
Ensure that the interconnect cable from the subwoofer is
connected to the DVD Home Theater unit.
•
•
Picture
No picture.
See TVs manual for correct video input channel selection.
Change the TV channel until you see the DVD screen.
Press
DISC
.
If this happens when you turn on the progressive scan setting or
change the TV type setting, you have to switch to its default
mode:
Press
Z
to open the disc compartment.
Press
B
(for progressive scan) or
b
(for TV type).
Press
SUBTITLE
.
•
•
•
1.
2.
3.
No picture on HDMI
connection.
Check if the HDMI cable is faulty. Replace a new HDMI cable.
If this happens when you change the HDMI video resolution,
press
HDMI
repeatedly until the picture appears.
•
•
Warning!
Risk of electric shock. Never remove the casing of
this unit.
•
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
Summary of Contents for HTS6100
Page 52: ...52 ...
Page 53: ...53 ...
Page 54: ... 2008 Philips Consumer Lifestyle All right reserved sgpjp 0821 75 1 ...