40
Video setup
1
Press
SETUP
.
»
[General Setup]
menu is displayed.
2
Press
to select
[Video Setup]
, then
press .
3
Select an option, then press
OK
4
Select a setting, then press
OK
.
To return to the previous menu,
•
press
BACK
.
To exit the menu, press
•
SETUP
.
Note
See the explanations of the above options in
•
the following pages.
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
•
[PAL]
– For PAL-system TV.
•
[NTSC]
– For NTSC-system TV.
•
[Multi]
– For TV that is compatible with
both PAL and NTSC.
Video Setup
HDMI Setup
Progressive
Closed Caption
TV Display
TV System
Picture Setting
[HDMI Audio]
Selects the HDMI audio setting when you
connect this Home Theater System and the
TV with a HDMI cable.
•
[On]
– Allows audio output through the
TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
•
[Off]
– Disables audio output from the
TV. The sound is only output through the
speaker system.
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On]
– Enjoys quiet viewing at night.
•
[Off]
– Enjoys surround sound with a full
dynamic range.
Note
Applicable only to Dolby Digital encoded discs.
•
EN
