20
EN
8 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing
of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, get support at www.philips.
com/support.
Main unit
The buttons on the home theater do not work.
•
Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Picture
No picture.
•
Make sure that the TV is switched to the
correct source for the home theater.
•
If this happens when you change the
TV system, press to open the disc
compartment, and then
439
on the remote
control to restore the default TV system.
No picture on a TV connected through HDMI.
•
Make sure that the HDMI cable is not faulty. If
it is faulty, replace it with a new cable.
•
If this happens when you change the HDMI
video resolution, press to open the disc
compartment, and then
304
on the remote
control to restore the default setting.
•
Wait for 10 seconds for auto recovery, or
change the HDMI video setting .
Disc does not play high-de
fi
nition video.
•
Make sure that the disc contains high-
de
fi
nition video.
•
Make sure that the TV supports high-
de
fi
nition video.
•
Use an HDMI cable to connect to the TV.
Sound
No sound from home theater speakers.
•
Connect the audio cable from your home
theater to your TV or other devices (see
'Connect audio from TV and other devices'
on page 8 ) .
•
Set up the audio for the connected device
(for HDMI connection only) (see 'Set up the
audio' on page 10 ) .
•
Reset your home theater to its factory
settings (see 'Restore default settings' on
page 17 ) , then switch it off and switch on
again.
•
On your home theater, press
SOURCE
repeatedly to select the correct audio input.
Distorted sound or echo.
•
If you play audio from the TV through the
home theater, make sure that the TV is muted.
Audio and video are not synchronized.
•
1) Press and hold
AUDIO SYNC
. 2) Press the
+/-
or
Navigation buttons
within 5 seconds to
synchronize the audio with the video.
Play
Cannot play a disc.
•
Clean the disc.
•
Make sure that the home theater supports
the type of disc (see 'Media formats' on page
18 ) .
•
Make sure that the home theater supports
the region code of the disc .
•
If the disc is a DVD±RW or DVD±R disc,
make sure that it is
fi
nalized.
Cannot play a DivX
fi
le.
•
Make sure that the DivX
fi
le is encoded
according to the 'Home Theater Pro
fi
le' with
the DivX encoder.
•
Make sure that the DivX
fi
le is complete.
DivX subtitles do not display correctly.
•
Make sure that the subtitle
fi
le name is the
same as the movie
fi
le name (see 'Subtitles'
on page 12 ) .
•
Select the correct character set (see
'Subtitles' on page 12 ) .
Cannot read the contents of a USB storage device.
•
Make sure that the format of the USB storage
device is compatible with the home theater.
•
Make sure that the
fi
le system on the USB
storage device is supported by the home
theater.
1_HTS6543-6553_94_EN1.indd 20
1_HTS6543-6553_94_EN1.indd 20
1/10/2012 2:58:06 PM
1/10/2012 2:58:06 PM