13
English
Wireless module - RWSS5510
Purchase the wireless module RWSS5510 (sold
separately) from a Philips authorized dealer.
Wireless transmitter:
Wireless receiver:
Connectors
Connect other devices to your home theater.
Front
a
(USB)
Audio, video or picture input from a USB
storage device.
b
MUSIC iLINK
•
Audio input from an MP3 player.
•
Connect to the auto calibration
microphone.
2
Press (
Home
) on your home theater
remote control, and select
[Setup]
>
[Audio]
>
[Acoustic calibration]
.
3
Follow the onscreen instructions to set up
the sound.
»
During the calibration, you hear a series
of test tones from the speakers and the
subwoofer. These sounds are normal -
don’t change the volume or move the
speakers, and be sure to keep quiet until
the calibration finishes.
4
After the auto calibration, disconnect the
calibration microphone.
Manual setup
If the position of the speakers are more than
5 meters (16 feet) away from the calibration
microphone, or you want to fine-tune the
speaker settings after the auto calibration, you
can set up the speakers manually through the
speaker setup menu.
1
Connect your speakers and subwoofer as
described in the Quick start guide.
2
Press (
Home
) on your home theater
remote control, and select
[Setup]
>
[Audio]
>
[Speaker Setup]
.
3
Enter the distance for each speaker, and
then listen to the test tones and change the
volume. Experiment a little with the speaker
positions to find the ideal setting.
Wireless rear speakers
Convert the rear speakers of your home theater
into wireless speakers by using a wireless
module.
•
The wireless transmitter connects to the
Wireless Rear Audio
connector on your
home theater.
•
The wireless receiver connects to the rear
surround speakers and the power supply.
For more information, refer to the user manual
of your wireless module.
EN
Summary of Contents for HTS8562/12
Page 2: ......
Page 51: ...Language Code ...
Page 52: ... 2011 Koninklijke Philips Electronics N V All rights reserved sgpjp_1128 12_v1a ...
