25
7 Product specifications
Note
• Specification and design are subject to change
without notice.
Region code
The type plate on the back or bottom of the
home theater shows which regions it supports
Playback media
•
AVCHD, BD-RE, BD-Video, DVD-Video,
DVD+R/+RW, DVD-R/-RW, DVD+R/-R
DL, CD-R/CD-RW, Audio CD, Video CD/
SVCD, Picture files, MP3 media, WMA
media, DivX (Ultra)/DivX Plus HD media,
USB storage device
File Format
•
Audio: .mp3, .wma, .wav
•
Video: .avi, .divx, .mp4, .mkv, .wmv
•
Picture: .jpg, .gif, .png
Amplifier
•
Total output power: 800W RMS
•
Frequency response: 40 Hz-20 kHz / ±3dB
•
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Country
DVD
BD
Europe,
United Kingdom
Korea
Latin America
Australia,
New Zealand
Russia, India
China
A
A
A
A
C
C
C
C
Asia Pacific, Taiwan,
Update electronic user manual
1
Check the current version of the electronic
user manual installed in your home theater
(see ‘Check software version’ on page 24).
2
Insert a USB storage device into your PC.
3
In your web browser, navigate to www.
philips.com/support, and find your product.
4
Click on ‘Software and drivers’ in the left
panel, and then locate the ‘Electronic
Manual’. The electronic user manual is
compressed into a *.zip archive.
5
If the *.zip file at the Philips Support website
is a later version than the file in your home
theater, download the file in the root
directory of your USB storage device.
6
Unzip the downloaded file in the root
directory of the USB storage device.
»
A file named ‘
HTSxxxxeDFU.zip’ i
s
extracted in the ‘\UPG’ folder of your
USB storage device, ‘xxxx’ being the
model number of your home theater.
7
Disconnect the USB storage device from
the PC, and connect it to the home theater.
8
Press (
Home
).
•
Ensure that there is no disc inside
the disc compartment of your home
theater and it is closed.
9
Press
[3]
,
[3]
,
[8]
on the remote control.
»
Software update starts. When complete,
the home theater automatically switches
off and restarts.
10
When complete, disconnect the USB
storage device from the home theater.
Caution
•
Do not turn off the power or remove the USB
storage device during the update.
•
If power failure occurs during the update,
do not remove the USB flash drive from the
home theater. The home theater continues the
update as soon as the power is restored.
•
If an error occurs during the update, retry
the procedure. If the error reoccurs, contact
Philips Consumer Care.
English
EN
Summary of Contents for HTS9540
Page 2: ......
