the brushing mode you have selected (see
'Brushing modes'), the Quadpacer beeps at
different intervals during the brushing cycle.
Activating or deactivating features
You can activate or deactivate the following
features of your toothbrush:
- EasyStart
- Brush head replacement reminder
- Pressure sensor
To activate or deactivate these features, follow the
instructions below:
EasyStart
1
Put the handle on the plugged-in charger.
2
Press and hold the power on/off button while
the handle remains on the charger.
3
Keep the power on/off button pressed until you
hear a single short beep (after 2 seconds).
4
Release the power on/off button.
- Triple tone of low-med-high means the
EasyStart feature has been activated. The
brush head replacement light and battery
light will also blink green 2 times in unison to
confirm activation.
- Triple tone of high-med-low means the
EasyStart feature has been deactivated. The
brush head replacement light and battery
light will also blink amber 1 time in unison to
confirm deactivation.
Note: To achieve clinical efficacy, EasyStart needs
to be deactivated.
Brush head replacement reminder
Note: Make sure a brush head is attached on the
handle before you start this procedure.
17
English
Summary of Contents for HX6483/52
