Philips ILS-CL-2RES, User Manual

2-Button Remote Station User’s Guide

3

Lytemode System Overview

The Lytemode System is designed to control architectural 
lighting by distributing both power and intelligence. The system 
provides processing power and control at each respective Master or 
Remote Station, eliminating the need for a central processor. 
Lytemode Master Stations provide individual control for up to 16 
channels, 13 scenes plus “Off”, and adjustable fade times. Multiple 
Master Stations may be linked together for control of up to 128 
Channels and 13 preset scenes. By combining Lytemode Master 
Stations with Lytemode Remote Stations, the system provides 
remote access to scenes, Master Raise/Lower control, Multi-room 
partition control, or Master Station Lockout. Lytemode Master 
Stations are easily programmed using the front panel buttons, 
without removing the Master Station from the wall, and without the 
need for a computer. Lytemode Master Stations are compatible with 
both Lightolier Controls Insulated Gate Bipolar Transistor 
(IGBT) Dimming Cabinets as well as Silicon Controlled Rectifier 
(SCR) Dimming Panels.

Lytemode products are controlled by the Intelligent Lytemode 
System (ILS) protocol. All Lytemode control devices must be 
connected to the ILS system and given a unique ID (or address) in 
order to interact properly. The ID identifies the device on the 
network and allows the device to avoid network collisions when 
transmitting data.