6
EN
Pair the earpieces with your
Bluetooth device at the fist
time
1
Make sure that the earpieces is fully
charged.
2
Auto power on: open the charging capsule,
the earpieces discharged and the blue LED
indicator flash for 3 times with “power on”
voice prompt; Manual power on: on both
earpieces press and hold the multi-function
buttons for approxinmately 3s.
The right earphone led flashes
alternately in white and blue, and the
left earphone LED is off for 10s and the
blue LED flashes once.
Both earpieces are now powered on
and are paired with each other.
The earpieces is now in pairing mode
and is ready to pair with a Bluetooth
device (e.g. a mobile phone).
Blue LED
flashes once
for 10s
LED flashes
alternately in
white and blue
3
Turn on the Bluetooth function of your
Bluetooth device.
4
Pair the earpieces with your Bluetooth
device. Refer to the user manual of your
Bluetooth device.
In right earpieces, it has voice
“Connected”and LED goes off on both
earpieces and flash 1 time every 10s.
You can use your device to play music
or make a call.
Note
After powering on, if the earpieces cannot find
•
any previously connected Bluetooth device, it will
automatically switch to pairing mode.
The following example shows you how to pair
the earpieces with your Bluetooth device.
1
Turn on the Bluetooth function of your
Bluetooth device, select
Philips UT102
.
2
Enter the earpieces password “
0000
” (4
zeros) if prompted. For those Bluetooth
devices featuring Bluetooth 3.0 or higher,
no need to enter a password.
Philips UT102
