Headphones status Indicator
ANC is on
The white LED
will turn on.
ANC is off
The white LED will
turn off.
Ambient sound
The white LED
flashes slowly
4 Use your
headset
Connect the headset to
your Bluetooth device
Connect to ANC (active
noise cancelation)
Turn on your mobile phone/
Bluetooth device.
Press and hold the on/off button to
turn the headphones on.
The blue LED flashes.
The ANC function will be on/off
automatically.
The headphones are recon-
nected to the last connected
mobile phone/ Bluetooth
device automatically. If the last
one is not available, the
headphones try to reconnect to
the second last connected
device.
Tip
If you turn on the mobile phone/Bluetooth
device or activate the Bluetooth feature
after turning on the headphones, you have
to reconnect the headphones and mobile
phone/Bluetooth device manually.
Tip
The function keys will be disabled when
using line-in mode.
Tip
When the ANC function is not required, switch
off the ANC button to continue your call or
listening to music.
Note
The Ambient sound can be enable only when
ANC is also enabled.
If the headphones fail to connect to any
Bluetooth device within range in 5 minutes,
it will switch off automatically to save the
battery life.
Note
You can also use the headphones with
the audio cable provided. Make sure
the headphones turned on before using
the audio cable. Connect the supplied
audio cable to the headphones and
external audio device.
Enable ANC
• Press once ANC button for enable
noise cancelation.
• Press once ANC button for disable
noise cancelation.
Enable Ambient sound mode
ANC LED indicator status
Wired Connection
• Press once ANC button to enable
Ambient sound.
• Press once ANC button disable
Ambient sound.
