5
ENGLISH
•
Do not disassemble or modify the nebulizer in anyway. There are no serviceable parts.
The battery is non-replaceable.
•
Never charge or operate this product if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water.
•
Do not connect to other equipment not described in these instructions.
•
Do not charge your device on an aircraft.
•
Keep the power cord away from heated surfaces.
•
The nebulizer must be operated using the specified power sources.
•
Always check the inside of the mouthpiece assembly
or mask for any debris before use.
•
Do not use while operating a vehicle.
•
When operated at an ambient temperature 40˚C the handset can reach temperatures of up to
43˚C. The device should not be used for more than 10 minutes during this scenario.
•
Do not use in an anesthetic or ventilator breathing system.
•
InnoSpire Go and all its parts (including battery) must be disposed of properly and according
to the local regulations in force (for example the WEEE directive).
•
Small parts can be inhaled or swallowed. In addition, the cable, due to its length, may result
in provoking strangulation or asphyxiation. Do not leave the device alone with a small child
or physically challenged individual or individual with learning difficulties.
•
The nebulizer should not be used around flammable substances e.g. oxygen, nitrous oxide,
or in the presence of a flammable anesthetic mixture.
•
Never poke the mesh, or clean it with any sharp objects. This could damage the mesh and
prevent your device from operating properly.
•
Do not autoclave the device.
•
Report unexpected operation or events to Philips.
•
Precautions are to be taken in the event of changes in the performance of the device, please
refer to the troubleshooting section.
How to use your InnoSpire Go
After unpacking the nebulizer check you have all the items listed and that there is no visible
damage or defects. Contact your product distributor or Philips
customer service if anything
is missing or damaged. Prior to first use clean the mouthpiece assembly as per the cleaning
instructions and fully charge the battery.
Ensure the device is disconnected from the power
during assembly and disassembly.
Check the nebulizer and accessories are clean, dry and not damaged prior to use.
Attach the mouthpiece assembly to the handset.
Do not use separate mask adapter as
a mouthpiece.
Lift the green medication chamber lid.
1128271R02_InnoSpireGo_Euro2_Spreads_IFU_10B_FINAL.indd 5
11/8/17 5:07 PM
