DU-PH-0062-60 Rev A 7/16/07 GCX Corp Page 2 of 7
Assembling the Roll Stand
1. Insert bottom end of Post in center of Base and lay assembly on its side for access to bottom of base (not shown).
2. Using a 1/2'' [13mm] wrench, fasten Post to Base with one (1) 5/16-18 x 1'' HHCS, with 5/16 split lock washer, and
5/16'' flat washer as shown below. Return Roll Stand to upright position.
5/16 Flat Washer
5/16 Lock Washer
5/16-18 x 1'' HHCS
